Kmetijski stroj

TS 1220 M3

Precision tine harrow – Standard equipment:

- Working width: 12.00 m with 10 cm overlap each
- Sturdy yet lightweight frame construction
- Sections: 1x300 cm, 2x235 cm with hydraulic folding via 4 double-acting hydraulic cylinders
- Automatic, patented double pendulum bearing tine system
- Central tine pressure adjustment
Giedpfx Afsx T Rl Rezjl
- 6 support wheels, 16x6.5-8 pneumatic tires, ball bearings, adjustable height
- 2 different tension springs (A, C) for tine pressure available. Spring A is standard. Spring C allows hydraulically patented stepless tine pressure adjustment with double-acting cylinder, including throttle valve for fine control and large graduated scale, easily monitored from the tractor.
- 1 set of pendulum support wheels, 16.5x6.50-8/6 73M pneumatic tires, ball bearings, adjustable height, mounted at the rear center
- Adjustable track beam at the rear (80x80 mm) for track widths up to 3.00 m

Patented spring-in-spring system, continuously adjustable from 100g to 5000g. In the lower pressure range (from approx. 100g), the inner compression spring is active. From approx. 650g, the tension spring engages.

- 437 tines, 120° angle, carbide-coated. The harrow tines are precision-milled at the lower end (40 mm high, 2 mm deep) and fitted with a specially made sintered metal plate. This gives the tine a clearance angle, resulting in significantly lower penetration resistance. In turn, tine depth control is improved and crusted soils can be broken up more easily. The coating also greatly extends tine service life.
- 120° tines are recommended for mulch seeding with a high amount of organic matter on the surface or for vegetable growing. In general, these tines are ideally suited for all crops.

Subject to prior sale, modifications, and errors.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.