Nosilec orodja

LM Trac 285

Stanje: rabljeno, Leto izdelave: 2011, obratovalne ure: 10.156 h, vrsta goriva: dizel, Oprema: je imel nesrečo, kabina, ref: 250211 Cpjdpfx Abexg R Uijvjw Število pogonskih koles: 4 Tip menjalnika: pol-powershift Dobavni rok (v dneh): 1 Čelni nakladalnik

Stanje: rabljeno, Leto izdelave: 1982, Oprema: kabina, MB-Trac 800 Sredinski menjalnik Hidravlika Cpsdpsxrivpofx Abvow Gozdarska oprema je bila nameščena šele po obnovi. Vozilo nikoli ni delalo v gozdu!

Stanje: rabljeno, Leto izdelave: 1991, obratovalne ure: 12.805 h, moč: 132 kW (179,47 KM), naslednji pregled (TÜV): 04/2027, Oprema: ABS, kabina, pogon na vsa štiri kolesa, sprednja priključna naprava, Mercedes-Benz MB-Trac 1800 Intercooler * Appraisal report available * Tractor * Classic tractor * Vintage vehicle (Oldtimer) * Historic vehicle certificate (H-Gutachten) * Excellent condition * Year of manufacture: 1991 * First registration: 03.04.1991 * Inspection valid until: 04/2027 * 12,805 operating hours * Gross weight: 10,000 kg * Unladen weight: 6,300 kg * Overall dimensions: 4,730 mm x 2,480 mm x 2,950 mm * Engine: OM 366 * 5,917 cm³ displacement * 6-cylinder diesel * Water-cooled * Maximum speed: 40 km/h * Fully synchronized manual transmission with integrated front-wheel drive * Synchronized 8-speed transmission * Portal axles with planetary gear reduction * Hydrostatic power steering * Hydraulic four-wheel disc brakes * Rear PTO, switchable independently from 540 to 1,000 rpm * Rear linkage with 3,900 kg lifting capacity * Front hydraulics * 3 double-acting hydraulic control units at the rear * 3 double-acting hydraulic control units at the front * Free return flow in front and rear * Dual-circuit compressed air brake system * Work lights rear * Work lights front * Michelin 18.4 R 34 tyres * Original ISRI seat * Automatic trailer coupling (AHK) !! MB-Trac Museum Gevelsberg !! ATTENTION !!!!! PLEASE READ CAREFULLY !!!!! We explicitly reserve the right for prior sale, as this item is also advertised on other platforms. We strongly recommend a viewing and inspection to avoid any miscommunication regarding condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged! All internal dimensions provided are approximate. TRADE-INS ACCEPTED FOR ALMOST EVERYTHING!!! PART-EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Showroom: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday 8:30 - 17:00, Saturday 8:30 - 14:00 !!! Always over 500 new and used trailers in stock!!! Cpedpfx Aswd Dt Nobvow Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: rabljeno, Leto izdelave: 2014, 4900 operating hours Shredding of hardwood up to 45 cm Cjdpfx Abjv Em I Hovjpw Shredding of softwood up to 56 cm Throughput up to approx. 240 solid cubic meters Feed opening: Feed width 1.20 m Feed height (in mm): 680 Drum diameter: 82 cm Helix rotor Hydraulic blower Radio JES for shredder, camera, Screens G30, G80, Truck: 230,000 km, approx. 12,000 operating hours The machine has always been well maintained and is in good condition. Location: Customer

Stanje: novo, Leto izdelave: 2013, WFTRAC2460 WERNER WF TRAC 2460 6x6 Epsilon S 110 F 101 Klešče FG 43 S Burger vpenjalna miza z napenjanjem z jeklenico Kletka za lesene stebre z hidravličnim podaljškom Možno nakladanje 2x 2,5 m Pripravljeno za harvester 1x 10 t vitel Vožnja preko daljinskega upravljanja!! Stacionarno ogrevanje z predgretjem hidravličnega olja Zadnji del vozila je bil konec leta 2024 popolnoma ojačan s strani podjetja Werner. Cjdpfx Aboxlvg Ijvjpw Stroj je še v obratovanju in je na voljo po dogovoru. Za informacije o stanju stroja in nakupni ceni kontaktirajte prosim: g. Luis Sailer Mobilno. Stroj se prodaja izključno na račun gospoda Luisa Sailerja. Zaposleni, navedeni tukaj, podjetja AGARVIS Technik Saltenbrock GmbH niso več na voljo in ne morejo nuditi informacij. Hvala za razumevanje.

Stanje: rabljeno, Leto izdelave: 2025, obratovalne ure: 10 h, Oprema: kabina, Reference: 6346 Kubota D902, 16 kW, 3-cylinder diesel engine Liquid-cooled Electric starter Hydrostatic four-wheel drive OMT wheel motors, single speed Variable displacement travel pump Maximum driving speed: 12 km/h External hydraulic function: 1 pump, 34 L/min Hydraulic oil cooler ROPS roll bar with FOPS canopy Hour meter, fuel gauge, and warning lights 2 integrated LED headlights at the front Width: 105 cm (standard tires) 23x8.5-12 traction or turf tires Multi-connector on lift arm Telescopic boom AVANT-Guard Counterweight (29 kg) Combi trailer hitch Electric unlocking Tie-down eyelet on wheel hubs Suspended seat with armrests and seat belt 6-function joystick LED work lights on ROPS: 2 front, 1 rear (700 lumen) Lateral counterweights, 2 x 40 kg Length: 2195 mm Width: 1050 mm Height: 1980 mm Weight: 1030-1080 kg Transmission: hydrostatic Maximum traction force: 700 kp External hydraulics: 34 l/min, 185 bar Turning radius (inner/outer): 880 / 1970 mm Maximum lift height (with telescopic boom): 2750 mm Cedpfswhf Rksx Abvspw Tie-down eyelet on wheel hub Rear counterweight 29kg with handle Combi trailer hitch, ball Ø50mm and pin 6-function joystick LED work lights 700 lumen on ROPS, 2 front and 1 rear Lateral counterweights 80 kg (2 x 40 kg) Power: 22 hp DIN Engine information: Kubota Diesel Lead time (days): 1 Output: 16 kW

Stanje: novo, konfiguracija osi: 2 osi, vzmetenje: zrak, velikost pnevmatike: 245/70-17,5, Oprema: ABS, - EBS - LED lighting - Alloy wheels - Air suspension - Spare wheel - Toolbox - Central lubrication - Additional steering axle PAVIC 2-axle forestry machinery low loader Type: STLT2Z for harvester transport ---- Incoming! Colour can be freely chosen!!!! Fifth wheel load: 18,000 kg Axle load: 24,000 kg (technical) Gross weight: 42,000 kg (technical) Unladen weight: 9,300 kg Made in Germany!!!! Cpjdpfxsylviwj Abvjw Chassis as steel welded construction from high-grade fine-grain steel Lashing eyes 130 kN, 5 per side Further lashing eyes: 3 pairs on the raised deck Insert stake system made of galvanised steel with aluminium side walls (silver anodised) Steel front wall approx. 400 mm high Foldable aluminium drive-on ramps with mechanical safety SKF central lubrication system with reservoir (brake light controlled) with approx. 20 lubrication points Dimensions: Total length: 16,000 mm Deck length incl. rear section 11,364 mm Saddle height: 1,330 mm Ground clearance in driving position: 184 mm Saddle offset: 600 mm R1 dimension from kingpin forward: 410 mm (swing radius) R2 dimension: from kingpin to frame: 2,150 mm (swing radius) Further dimensions available on request (technical drawing) Axles: 2x 12,000 kg (technical) Gigant with drum brake, incl. 8 pcs. 245/70 R17.5" branded tyres on Alcoa Dura Bright rims Suspension: Pneumatic with lift and lower function Second ride height + approx. 50 mm can be activated from the cab. When 20 km/h is reached, vehicle automatically lowers again. Including axle load gauge Coupling device: 2" kingpin (interchangeable, single position) WITHOUT landing legs! -> Customers use a wide timber beam placed under the front frame here. Braking system: Wabco EBS with axle load measuring device (Smartboard) including odometer Parking brake: spring-loaded accumulator Lighting system: Tail lights 2 pairs (3-chamber lamp) Side marker lights LED Outline marker lights LED Front and rear position lights LED LED reversing light and auxiliary light, each round Number plate light LED 1 rotating beacon, pluggable and switchable from cab via separate switch 4 pcs. LED work lights 4 pcs. overwidth markers, double secured (wing screw and pin) with red/white LED lighting Steering: Tridec HF-E (hydraulic forced steering on both axles) including automatic tracking and straight-ahead positioning. Remote control Tridec (radio remote control), also usable with cable operation Paintwork: Entire steel construction shot blasted after welding and primed with special adhesion primer. Subsequent 2K finish in RAL colour of your choice. Axles and wheel hubs are black or alternatively painted in RAL colour at additional cost Other mounted parts are galvanised and/or painted / powder coated or made of aluminium (with or without anodising) Approval: Including §13 certificate Including §70 certificate (Customer must provide suitable and approved 3-axle tractor unit) including, among others, circular driving test at TÜV Nord in Meppen. This is a non-binding offer. Subject to prior sale, errors and changes reserved. Axle configuration Tyre size: 245/70-17.5...

Stanje: rabljeno, Leto izdelave: 2025, Oprema: kabina, Maximum Diameter: 28 cm Weight: 580-900 kg Oil Flow Rate: 50 to 100 L/min Oil Pressure: 280 Bar For 7-15 T excavators Autospeed Codsi Hy U Ropfx Abvopw Tiltrotator With or without collector Condition: New

Stanje: novo, največja dovoljena obremenitev: 36.400 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment. Full specification available upon request. Cedpfx Aoyhkqujbvopw - Gooseneck in SNT design to optimize the platform length, approx. 3,700 mm long, rear with a chamfer of approx. 1,000 mm x 6° - For tractor units: 4 x 2 and 6 x 2 - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S, & 15-pin sockets - 3 kW electro-hydraulic power pack to control hydraulic functions, except for hydraulic winches. Without installation of supply connections on the tractor unit - Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then every approx. 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - One mounting hole at the rear upper section of the outer beams of the gooseneck for a bolted lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - 3 pairs of recessed lashing rings inside the outer beam of the gooseneck (LC 5,000 daN) - 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) - The gooseneck and rear chamfer feature grating flooring with 5 mm steel reinforcement - 2-inch king pin - Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) - Spiral cable to supply the electro-hydraulic power pack and/or the electric winch (approx. 35 mm², approx. 3.5 m long) between trailer and tractor unit with plug (NATO-NATO) - On the gooseneck: 1 pair of detachable aluminum side walls, approx. 400 mm high, anodized finish LOAD PLATFORM: - Load area, approx. 9,600 mm long, with rear chamfer approx. 900 mm x 6° - Loading platform behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg - TPMS tire pressure monitoring system according to ECE R 141 - BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steered. 3rd axle with electro-magnetic reverse lock activated via reverse gear and manually - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF twin tires. Brand at our discretion, load index 143/141J (144/144F) - Mechanical landing legs with 2-speed gearbox and crank - Continuous grating flooring with approx. 5 mm steel underlay as additional reinforcement, designed for point loads: - on the lift bed - on the load platform - Painted sand coating on the cover plates of the gooseneck as well as transition areas between gooseneck and lift bed, lift bed and load platform, and between load platform and ramps - 1 spare wheel mounting bracket under the load platform, right side before the axles - Cutouts in the outer frame of the platform and lift bed for hooking in tension belts (LC 2,000 daN) - 11 pairs of recessed lashing rings in the outer frame of the platform, foldable outward (LC 10,000 daN): - 3 pairs in the outer frame of the lift bed - 8 pairs in the outer frame of the platform - 11 pairs of recessed lashing rings along the central girder (LC 5,000 daN): - 3 pairs in the lift bed - 8 pairs in the rear part of the platform - Control valves for the hydraulic ramps on the right side of the vehicle - 1 pair of foldable mechanical rear supports with one-hand operation HYDRAULIC LOADING RAMPS: - 1 pair of two-part AXS steel ramps, approx. 4,920 mm long, and a...