Tehnologija gnojevke

Joskin VOLUMETRA 18000 D

VOLUMETRA 18000 D
Joskin slurry tanker
With vacuum pump
Forced steering axle - with drawbar eye,
Control center with: 2 nitrogen spheres, manual pump with
oil tank and pressure gauge instead of
Godpfsxntdisx Affsuh
trailing axle
Axle distance of 1,820 mm instead of 1,550 mm
with hydro-tandem or hydro-tridem
(PROHIBITED with rigid axles) – REQUIRED
for wheels Ø 1,601 to 1,675 mm
Load-dependent air brakes for
vehicle with hydraulic suspension of
the axles (air brakes required)
2 rear LED work lights (with
control unit in the cab)
Marker lights and side
LED lights
Rear underrun protection
Pump type PNR 155 JUROP (15,200 l/min
at atmospheric pressure – 13,217 l/min
at 60% vacuum) –
direct connection 1,000 rpm –
automatic lubrication,
siphon separator 60 l, rubber hose Ø 100 mm,
JOSKIN overpressure valve Ø 150 mm
and air injection cooling
instead of MEC 8000
ECOPUMP: silencer with large-volume
oil separator and increased air intake –
noise reduction included
Single wide-angle PTO shaft
(Walterscheid)
Fill level indicator Ø 6" (150 mm
(Plexiglas sight tube) instead of
standard sight glass
Suction slide valve Ø 6" (150 mm) with
guide rail, type Perrot
Turbo filler Ø 8" (200 mm) high-flow
(hydraulics: 50 l/min at 180 bar) with pressure gauge Ø 60 mm
(suction slide required)
Preparation for FrontJUMBO without installation
Ø 200 mm or for side JUMBO
suction arm
Ball head Ø 50 mm for coupling rod
of the steering axle
Electrohydraulic control with
low flow rate – everything except for
hydraulic motor (distributor head, turbo and
shredder) (inlet block required)
– per function
Flow diversion for turbo, agitator
or central tire inflation system (high flow with PVG) – (functions
with low flow rate
not available when using this function) (ATTENTION: can only be ordered once)
TÜV approval for 40 km/h (without rear underrun protection)
Tires 750/60R30.5 FL 630 SUPER (BKT) 181
D (Ø 1,675 x 754 mm, 11,220 kg per wheel
at 40 km/h and 4 bar) instead of 400R22.5
Mini wheel arch installation (only available for VOLUMETRA
and EUROLINER)
SOLODISC pre-equipment for COBRA2,
TETRAX, QUADRA, EUROLINER and VOLUMETRA
– including AUTOMATE kit 2+3
instead of rear slide valve and standard
distributor
AUTOMATE 2+4 instead of AUTOMATE 2+3
(required on SOLODISC with
hydraulic compensation)

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.