Gozdarsko vozilo

Pfanzelt MORITZ FR 75

MORITZ FR 75
(0010) _RH-10575/6-II Pfanzelt Forestry Crawler
(0020) Dimensions:
(0030) - Tracked vehicle with AS rubber track system,
(0040) Track width 300 mm
(0050) - Hydraulically adjustable width,
(0060) from 1,200 mm to 1,600 mm external width
(0070) Telescopically adjustable via radio control
(0080) - Overall length with mounted winch and
(0090) dozer blade approx. 2,300 mm
(0100) - Ground clearance: approx. 320 mm
(0110) - Height to top edge of frame approx. 1,350 mm
(0120) - Approach angle approx. 50° at the front and
degree at the rear
(0140) - Weight approx. 1.0 t in
(0150) standard configuration
(0160) Engine:
(0170) - Deutz diesel engine TD2.9L4
4 cylinders, water-cooled, turbocharged
(0190) - Output 55 kW / 75 HP
(0200) - EU Emission Stage V
(0210) - Fuel capacity: approx. 45 l
(0220) - Hydraulic oil: approx. 30 l
(0230) - Cleanfix reversible fan
(0240) - Combination radiator water/hydraulic oil
(0250) Drive hydraulics:
(0260) - Closed 2-circuit system
(0270) proportional (2 x 11 kW),
(0280) - All drive functions controllable via radio
(0290) - Pre-installed fine oil filtration
(0310) - Infinitely variable driving speed:
1st gear 0–3 km/h and 2nd gear approx. 0–6 km/h
(0330) - Infinitely adjustable maximum speed
(0350) - Drift compensation setting for balancing
(0360) hillside gravity during
(0370) mowing work across slopes
Itjdpfxjxbittj Ab Hjd
(0380) - Automatically hydraulically tensioned
(0390) double idler wheel
(0400) On-board hydraulics:
(0410) - Separate oil circuit, pump delivers approx.
l/min at 200 bar
(0430) - Standard scope includes one proportional
(0440) control unit (for lifting gear) with float position
(0460) - Optionally up to 4
(0470) proportional double-acting valves
(0480) and 2 on/off double-acting
(0490) valves
(0500) Chassis:
(0510) - Torsion-resistant box profile made of
(0520) special steel
(0530) - Large lockable storage box
(0540) integrated on the side of the chassis
(0550) and one top storage box (open)
(0560) - Lashing points for securing the crawler
(0570) - Large engine hood for maintenance
(0580) - Full-length underbody guard made
(0590) of solid steel
(0600) - Surrounding branch deflector with
(0610) integrated hood protection
(0620) - Standard rear lifting unit with max.
(0630) lifting force at coupling point: 11 kN
(0640) - Optional front lifting unit with max.
(0650) lifting force at coupling point: 7 kN
(0660) Machine operation:
(0670) - Radio remote control for all functions
(0680) - Emergency stop
(0690) - Diesel engine speed adjustment
(0700) - Fan reversal
(0710) - Driving and steering
(0720) - 1st and 2nd gear selection
(0730) - Drift compensation setting
(0740) - Winch control
(0750) - Dozer blade up/down
(0760) - Lifting gear float position
(0770) - Optional lifting gear relief
(0780) - Track width adjustment
(0790) - Travel direction change (reversing)
(0800) - PTO on/off
(0810) - Auxiliary control valves
(0820) - Winch operation / external consumer
(0830) - Horn
(0840) - Optional lighting
(0850) ALL RADIO COMMANDS ON ONE CONTROL LEVEL
(0860) PTO TRANSMISSION Crawler powered by PTO gearbox
(0870) - Maintenance-free, oil-bath operated and
(0880) oil-cooled multi-plate clutch
(0890) PTO shaft speed at gearbox approx.
540 rpm at 2,100 rpm engine speed
(0910) Rotation direction viewed from the stub
(0920) in clockwise direction
(0930) PERFORMANCE HYDRAULICS Crawler hydraulic power supply
(0940) LIFTING DEVICE Excavation device winch
(

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.