Tehnologija gnojevkeWienhoff
21.000 T PTW PROFI LINE
Tehnologija gnojevke
Wienhoff
21.000 T PTW PROFI LINE
Leto izdelave
2017
Stanje
Rabljeno
Lokacija
Beckum 

Prikaži slike
Prikaži karto
Osnovni podatki
- Oznaka:
- Tehnologija gnojevke
- Proizvajalec:
- Wienhoff
- Model:
- 21.000 T PTW PROFI LINE
- Leto izdelave:
- 2017
- Stanje:
- rabljeno
Cena in lokacija
- Lokacija prodajalca:
- Hammer Straße 92, 59269 Beckum, Nemčija

Klic
Tehnične podrobnosti
- Oprema:
- zavorni sistem na stisnjen zrak
Podrobnosti ponudbe
- ID ponudbe:
- A194-75-576
- Št. reference:
- 300447272
- Nazadnje posodobljeno:
- dne 02.07.2025
Opis
21,000 T PTW PROFI LINE
(0010) Wienhoff Slurry Tanker 21000 T PTW PrL
(0020) Slurry Tanker Type 20,800 _TW Profi Line, coated, FV
(0021)
(0022) Please direct your inquiries exclusively to
(0023) the following contact details!!
(0024) Jan Lohoff Tel.
(0025) The employees listed here from the
(0026) AGRAVIS Technik Center
(0027) are automatically registered and
(0028) cannot provide you with any information
(0029)
(0030) Slurry tanker with internal coating and external paint finish.
(0040) 7.10 m cylinder,
(0050) 6 mm wall thickness, 1.90 m tank diameter, three welded
(0060) baffle plates
(0070) inside the tank and inspection cover parallel to rear cover.
(0080) Tank with fluid displacement system for
(0090) axle load optimization.
(0100) Tank in classic Fendt green, 32" wheels with red external rim surfaces,
(0110) axles, drawbar, and small parts in black.
(0120) Safety valve
(0130) Simple tank filling and venting (through the tank)
(0140) (Important: Outlet hose routed downwards)
(0150) Second tank filling and venting at rear for FV (Only with
(0160) CAN-bus)
(0170) (Important: Outlet hose routed downwards)
(0180) Level indicator with 220 mm float at the front
(0190) in tank for CAN-bus
(0200) 8" suction port with 8" manual slide gate and quick coupler
(0210) (front left for suction)
(0220) 6" suction port with 6" manual slide gate and quick coupler
(0230) (front right for suction and rear left directly in tank for discharge)
(0250) 8" hydraulic slide gate
(0260) (between the suction slide gates and
(0270) the stone trap, this gate
(0280) is coupled with shifting automation)
(0290) 14 t Gigant air suspension, forced steering by cable, tandem
(0300) with 140 mm FAD axles, track width 2225 mm, RDR prepared.
(0310) Low center of gravity: Axles above the springs (one wheel arch
(0320) per axle)
(0330) Wheels: 30.5 LR 32 BKT Roadmax FL 690
(0340) Wheels: 650/65 R 30.5 Vredestein Flotation Trac
(0350) for maize application, with RDA connection
(0360) (mount these wheels prior to delivery)
Blodpfx Adjwwnd Eenep
(0370) Hydro-pneumatic sprung lower hitch 1900, K80 with
(0380) hydraulic support leg
(0390) Ball coupling height: 700 mm
(0400) Prepared for top cylinder system
(0410) Flat steel on the drawbar
(0420) Dual-circuit air brake with ALB (automatic load-dependent brake valve)
(0430) 40 km/h configuration with galvanized mudguards:
(0440) Galvanized mudguards with round steel edge,
(0450) warning panels + marker lights
(0460) Underrun protection with truck lighting
(0470) 40 km/h TÜV certificate
(0480) Surcharge for LED lighting at underrun protection
(0490) Outline marker lights on underrun protection for better
(0500) vehicle dimension awareness
(0510) LED
(0520) Active marker lights instead of cat's eyes on
(0530) the vehicle sides
(0540) LED
(0550) LED work lights, 2 pcs, positioned:
(0560) left and right on the tank
(0570) 2x as reversing lights on underrun protection
(0580) Preparation for camera/rotating beacon
(0590) Rear tank mount - steel tube for cable routing
(0610) Vogelsang RotoCut M 10,000 macerator
(0620) mounted on large stone trap box.
(0630) Vogelsang rotary lobe pump VX 186/390Q - 9000 L/min
(0640) Injection system with reduction gearbox
(0650) including hydraulic gear shift
(0660) Bondioli Pavesi drive shaft size 9 with 10 mm
(0670) shear bolt and wide angle for large pumps
(0680) Overpressure val...
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
(0010) Wienhoff Slurry Tanker 21000 T PTW PrL
(0020) Slurry Tanker Type 20,800 _TW Profi Line, coated, FV
(0021)
(0022) Please direct your inquiries exclusively to
(0023) the following contact details!!
(0024) Jan Lohoff Tel.
(0025) The employees listed here from the
(0026) AGRAVIS Technik Center
(0027) are automatically registered and
(0028) cannot provide you with any information
(0029)
(0030) Slurry tanker with internal coating and external paint finish.
(0040) 7.10 m cylinder,
(0050) 6 mm wall thickness, 1.90 m tank diameter, three welded
(0060) baffle plates
(0070) inside the tank and inspection cover parallel to rear cover.
(0080) Tank with fluid displacement system for
(0090) axle load optimization.
(0100) Tank in classic Fendt green, 32" wheels with red external rim surfaces,
(0110) axles, drawbar, and small parts in black.
(0120) Safety valve
(0130) Simple tank filling and venting (through the tank)
(0140) (Important: Outlet hose routed downwards)
(0150) Second tank filling and venting at rear for FV (Only with
(0160) CAN-bus)
(0170) (Important: Outlet hose routed downwards)
(0180) Level indicator with 220 mm float at the front
(0190) in tank for CAN-bus
(0200) 8" suction port with 8" manual slide gate and quick coupler
(0210) (front left for suction)
(0220) 6" suction port with 6" manual slide gate and quick coupler
(0230) (front right for suction and rear left directly in tank for discharge)
(0250) 8" hydraulic slide gate
(0260) (between the suction slide gates and
(0270) the stone trap, this gate
(0280) is coupled with shifting automation)
(0290) 14 t Gigant air suspension, forced steering by cable, tandem
(0300) with 140 mm FAD axles, track width 2225 mm, RDR prepared.
(0310) Low center of gravity: Axles above the springs (one wheel arch
(0320) per axle)
(0330) Wheels: 30.5 LR 32 BKT Roadmax FL 690
(0340) Wheels: 650/65 R 30.5 Vredestein Flotation Trac
(0350) for maize application, with RDA connection
(0360) (mount these wheels prior to delivery)
Blodpfx Adjwwnd Eenep
(0370) Hydro-pneumatic sprung lower hitch 1900, K80 with
(0380) hydraulic support leg
(0390) Ball coupling height: 700 mm
(0400) Prepared for top cylinder system
(0410) Flat steel on the drawbar
(0420) Dual-circuit air brake with ALB (automatic load-dependent brake valve)
(0430) 40 km/h configuration with galvanized mudguards:
(0440) Galvanized mudguards with round steel edge,
(0450) warning panels + marker lights
(0460) Underrun protection with truck lighting
(0470) 40 km/h TÜV certificate
(0480) Surcharge for LED lighting at underrun protection
(0490) Outline marker lights on underrun protection for better
(0500) vehicle dimension awareness
(0510) LED
(0520) Active marker lights instead of cat's eyes on
(0530) the vehicle sides
(0540) LED
(0550) LED work lights, 2 pcs, positioned:
(0560) left and right on the tank
(0570) 2x as reversing lights on underrun protection
(0580) Preparation for camera/rotating beacon
(0590) Rear tank mount - steel tube for cable routing
(0610) Vogelsang RotoCut M 10,000 macerator
(0620) mounted on large stone trap box.
(0630) Vogelsang rotary lobe pump VX 186/390Q - 9000 L/min
(0640) Injection system with reduction gearbox
(0650) including hydraulic gear shift
(0660) Bondioli Pavesi drive shaft size 9 with 10 mm
(0670) shear bolt and wide angle for large pumps
(0680) Overpressure val...
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Ponudnik
Opomba: Brezplačno se registrirajte ali prijavite, za dostop do vseh informacij.
Registriran od: 2016
Pošlji zahtevo
Telefon & Faks
+49 5272 ... oglasi
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake




































