Obdelava lesa

Eschlböck Biber BIBER 60 ZK

BIBER 60 ZK
Eschlböck chipper with 3 cm screen
Biber 60 ZK for crane feeding with crane Epsilon C50F 86
> Chipping system: drum chipper
> Wood diameter up to 40 cm
> Infeed opening 40 x 70 cm
> Extended infeed chain conveyor (2 m)
> Side feeding
> Chipping drum with 10 pairs of staggered chipping blades
> Counter knife (three-piece), double usable
> Drum diameter: 648 mm
> Easily interchangeable screens: chip length 3 or 5 cm
> Standard including 1 screen, installed for desired chip length
> Discharge: auger discharge including clearing system, blower diameter approx. 1270 mm
> Separate hydraulic circuit with 220 l hydraulic tank, with oil level and temperature gauge
> Reinforced hydraulic drive with gear-supported infeed
Tsdjv H Smwopfx Ah Eod
> Control panel for all functions: pluggable on the machine, with cable remote control, mountable in the tractor cab
> Infeed belt and flap, electro-hydraulically operated
> Smart control for infeed speed adjustment including visualization, operator-guided control, adjustable chip length and overload protection (no stress), including hour meter (daily and total operating hours)
> Discharge chute hydraulically erectable and foldable, infinitely rotatable by 240°, with adjustable discharge flap
> Infeed hopper can be raised and lowered
> Drive: via PTO shaft (from approx. 80 kW up to max. 150 kW)
> PTO speed 1000 rpm
> V-belt pre-tension for SPC belts
> Drive shaft with overload and freewheel clutch
> Road axle including lighting, high or low coupling, tire size 560/45 R 22.5
> Paintwork: RAL 3020 traffic red
Crane Epsilon C50F86
> Max. reach 8.60 m
> Net lifting torque 54 kNm
> Net slewing torque 18 kNm
> With foldable crane feeding trough
> Single axle 40 km/h or 60 km/h including dual-circuit air brake
> Automatic coupling for air-braked 2-axle trailer up to 8 t GVW
> Crane with stabilizers
> Including 4-finger grab HSP 020BIO HD and rotator
> Danfoss control valve block with electric joystick, Prof 1 control, 6 proportional and 2 on/off functions for hydraulic outriggers (cable remote),
> 2x LED work lights
> Oil supply for crane from tractor, min. oil flow 120 l/min
> Load-sensing control from tractor required
> Weight approx. 8230 kg
Splitting biber for Biber 60

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.