Harener Baumaschinenverleih

Stanje: rabljeno, lastna masa: 3.480 kg, največja dovoljena obremenitev: 20 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prva registracija: 03/2013, vzmetenje: jeklo, velikost pnevmatike: 205/ 14, stanje pnevmatik: 80 odstotek, barva: bela, Leto izdelave: 2013, velikost sprednje pnevmatike: 205/ 14, velikost zadnje pnevmatike: 205/ 14, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: registracija tovornjaka, žerjav, Reference number for inquiries: 41180 Klaas, K21-31TSP-A * Year of manufacture: 2013 * Crane * Outrigger supports * Suspension: leaf spring * Gross vehicle weight: 3,500 kg * Unladen weight: 3,480 kg * Payload: 20 kg * Permissible total weight: 3,500 kg * Tyre condition 1st axle: 80% -- 80% - Tyre size: 205/R14 * Tyre condition 2nd axle: 70% -- 70% - Tyre size: 205/R14 * Tyre sizes: 205/R14 * KLAAS K21-31TSP-A aluminium crane * 1 previous owner * Maximum lifting capacity: 1,500 kg * Radio remote control * 2 manual extensions * 30-metre aluminium crane * Operating hours: 3,037 * Load diagram: see photo Dksdpfxey Ilfno Al Hsl Disclaimer: Subject to change, prior sale, and error. More photos and videos available on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Processing of all (export) documentation * Order of export / customs licence plates * Vehicle preparation: new tarpaulins, signwriting, painting, etc. * Professional loading / load securing * TÜV approvals, registration service * Transfer of commercial vehicles Please contact our trained staff—we are happy to advise you.

Stanje: novo, lastna masa: 4.400 kg, največja dovoljena obremenitev: 19.600 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5, medosna razdalja: 8.795 mm, Oprema: ABS, | Krone AD Jumbo plato prikolica 3-osna Nova | Multilock zunanji okvir po celotni dolžini | Zračno vzmetenje spredaj in zadaj (dviganje/spuščanje) | Vrtljivo podvozje z krožno kroglo, nizko vzdrževalni vrtljivi venec | Vlečna ušesa 40 mm | BPW osi z bobnastimi zavorami | Nosilec za rezervno kolo | Dimenzije (D x Š x V): 8,60 x 2,48 x 0,93 m | Jeklena čelna stena 1,60 m | Medosna razdalja: 8.795 mm | Pnevmatike 12x spredaj/zadaj: 235/75 R 17,5 | Pridržujemo si pravico do napak, vnosov in predhodne prodaje. Dsdpfxoy H Ilzs Al Hjkl

Stanje: rabljeno, največja dovoljena obremenitev: 14.700 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2017, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 10.350 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 850 mm, skupna širina: 2.550 mm, Skupna dolžina: 12.000 mm Nakladalna dolžina: pribl. 10.350 mm Širina: 2.550 mm / Nakladalna širina pribl. 2.400 mm Nakladalna višina: pribl. 850 mm Dsdpfxoy Hzvmo Al Hokl Dodatne informacije - 3. os prisilno vodena - Notranja nakladalna višina pribl. 3.150 mm - Dvojna pnevmatika 215/75R17,5 - BPW osi - Zračno vzmetenje - Drsna ponjava Vozilo je lahko polepljeno z oglaševanjem, označeno in/ali z ostanki oznak.

Stanje: novo, skupna masa: 3.500 kg, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.100 mm, velikost pnevmatike: 13, Leto izdelave: 2025, ANHÄNGERWIRTZ, tržište za preuzimanje vaših novih prikolica, nudi renomirane proizvođače! Preko 850 novih prikolica na lageru, više od 130 polovnih prikolica stalno u ponudi. Dkedpfjy Hrgpox Al Hsl Neobavezan primer: Variant mašinski transporter Variant Multitransporter 3563 UX 620x210x30 cm, 3800 kg, sa kočnicom, tandem visokoutovarivač, nisko šasija, 13" točkovi, kipovana platforma sa ručnom hidraulikom, aluminijumske stranice 30 cm preklopne, utovarna rampa kompletna visine 90 cm sa pomoćnim podizačem, DIN prstenovi za vezivanje na šasiji, automatski točak za podršku, moderna LED rasveta... Dostupno u raznim dužinama i konfiguracijama opreme. Trailershop vam nudi jedinstveni Roadster po fer ceni sa brzom isporukom. Novo vozilo, faktura sa iskazanim PDV-om, garancija od stručnog prodavca sa 35 godina iskustva. Autorska prava za slike, tekstove i logotipe 04.2026 VDK-3563UX30BLACK.

Stanje: novo, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Leto izdelave: 2026, Oprema: ABS, WIESE Platform Trailer DS 18 PT-TL (Container / Twistlocks) * Vehicle type: Platform trailer / Container trailer * Manufacturer: WIESE * Model: DS 18 PT-TL – Container version ---Technical Data * Axle load: 16,000 kg (2 x 8,000 kg) * Axles: 2 SAF axles * Tyres: 235/75 R17.5, twin tyres * Air suspension: yes * Ride height: approx. 890 mm unladen * Coupling height: approx. 700 mm * Width: approx. 2,540 mm ---Chassis / Superstructure * Platform trailer with twistlocks for container transport * Multiple container locks (fixed + extendable) * 6 pairs of lashing rings on the outer frame * Additional lashing points under the cross members * Reinforced outer frame with lashing holes * 27 mm birch plywood anti-slip floor * Galvanised omega profiles * Cross member spacing max. 400 mm ---Brake / Safety * EBS brake system (Knorr or Wabco) * ABS / Roll Stability Program * Dual-circuit air brake system * Basic tyre pressure monitoring Djdpey Euffefx Al Hekl * 2 air tanks (each approx. 80 L) ---Features * Complete LED lighting system * Side LED marker lights (flashing) * 15-pin electrical system * Rear underrun protection * Side impact protection * Plastic mudguards (180°) * Mud flaps with "WIESE" logo * Rear folding and extendable access ladder * Rear impact buffers ---Towing Equipment * 18t drawbar (fixed and extendable) * 40 mm drawbar eye * Turntable with slewing ring * Height adjustment available ---Miscellaneous * TÜV certificate available * Galvanised chassis * High-quality steel construction * Made in Germany For further information, please feel free to contact us.

Stanje: rabljeno, največja dovoljena obremenitev: 2.150 kg, skupna masa: 3.500 kg, konfiguracija osi: 3 osi, prva registracija: 02/2022, skupna širina: 2.150 mm, skupna višina: 890 mm, Temared prikolica Vitlo Dkjdpfx Alsy Dyz As Hel 3 osi Prva registracija / leto izdelave: 17.02.2022 / Vrsta vozila: polprikolica Tip nadgradnje: platforma KBA št. (HSN/TSN): 1897//000 Barva laka: srebrna Število prejšnjih lastnikov: 1---- Vozilo ni pripravljeno! Dostava po celotni Nemčiji možna za doplačilo. Pridržujemo si pravico do napak in vmesne prodaje. Vaše vozilo z veseljem vzamemo v menjavo. Financiranje / leasing možno tudi brez pologa! Imate še vprašanja? Z veseljem vam svetujemo!

Stanje: rabljeno, Ima TÜV in veljaven UVV. Izstavi se račun z vključenim DDV-jem. DDV je ločeno izkazan. Preda se le odjavljen. Dksdpfx Asy A Ratel Hel

Stanje: rabljeno, največja dovoljena obremenitev: 600 kg, skupna masa: 750 kg, konfiguracija osi: 1 os, prva registracija: 04/2025, dolžina tovornega prostora: 2.500 mm, širina tovornega prostora: 1.260 mm, višina nakladalnega prostora: 300 mm, skupna širina: 1.710 mm, skupna višina: 790 mm, Zabojni priklopnik je izdelan iz stabilne aluminijaste konstrukcije in obrabno odpornega lesenega poda. Pridržujemo si pravico do napak in vmesne prodaje. Dkodpoy A A Snefx Al Hol

Stanje: novo, največja dovoljena obremenitev: 15.825 kg, skupna masa: 20.500 kg, konfiguracija osi: 2 osi, širina tovornega prostora: 2.480 mm, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles, including units available for immediate or short-term delivery, on our website. Excerpt from equipment specification. Full equipment details available upon request. Chassis: * Steel welded construction made of welded longitudinal beams and punched Z-cross members, close cross member spacing for high floor load capacity * Ramp storage between the longitudinal beams behind the axle assembly under the load floor, two insertion slots for one ramp each, with locking plate in the rear header frame Underride guard: * According to EC regulations Front landing gear: * Single-sided operated landing legs Rear support: * Two adjustable drop legs Axles: * 2 x 10 t air suspension axle assemblies, manufacturer SAF, drum brakes approx. 300 x 200 mm, hub-centered wheel fixing for twin tyres, ABS, total air suspension travel approx. 200 mm (raise approx. 140 mm, lower approx. 60 mm), operated by hand lever with ratchet function Tyres: * 8 units, 235/75R 17.5 – make as per our choice, on steel rims 6.75 x 17.5, fitted with offset Splash protection: * PVC spray guards in front of and behind axles, EC compliant Load securing: Dsdpfx Aley Auhbs Hskl * On the outer frame approx. every 150 mm a hole for lashing straps, tensile strength approx. 2.5 t (lashings can be hooked in with side walls closed, bevelled outer frame) * 6 pairs of foldable lashing rings, evenly distributed, tensile strength approx. 8 t * Stake pockets for removable stanchions 80/50: 3 pairs of stake pockets on the outer frame, evenly distributed Brake system: * Compressed air brake system according to EC regulations with EBS * Two spiral hoses as connection to the towing vehicle with red/yellow coupling heads * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm Z-hardwood floor recessed into the outer frame Front wall: * Made from 25 mm removable front board Lighting system: * Lighting in accordance with EC regulations, 24 volt, multi-chamber tail lights, number plate lights, side marker lights and lane control lights at the rear, connection plate on the left of the drawbar including connection cable with 15-pin and two 7-pin plugs Accessories: * 2 wheel chocks with holders * Removable warning beacon at the rear * Additional 40 mm coupling device supplied (max. GVW 13,500 kg) * Rear extension approx. 800 mm including underride guard, extendable loading platform with load capacity approx. 2 t, locking positions every approx. 200 mm * Mechanically adjustable rigid drawbar, 6 x approx. 100 mm increments, with bolt-on towing eye approx. 50 mm as per DIN 74053 * 4 rows of crosswise stake pockets evenly distributed across the loading platform * 12 removable stanchions made of galvanized pipe, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for one 20’ container, container locks extendable to approx. 2,820 mm, according to ISO 1496, EN 284 or EN 452 * 1 pair aluminum ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles * 6 pieces of 25 mm side walls and a rear wall made of anodized aluminum hollow profiles, approx. 600 mm high, foldable and removable, removable Kinnegrip stanchions (internal width approx. 2,480 mm), includes side wall holder at front wall Paintwork: * Chassis shot-blasted, cleaned, and hot-dip galvanized to latest standards * Structure parts cleaned, primed and hot-dip galvanized * Chassis: Hot-dip galvanized & RAL 3002 carmine red * Side walls: RAL 3002 carmine

Stanje: novo, največja dovoljena obremenitev: 16.180 kg, skupna masa: 20.500 kg, konfiguracija osi: 2 osi, skupna širina: 2.480 mm, Oprema: ABS, You can find our complete range of vehicles with immediately and soon-available stock on our website. Excerpt from the features list. Full specification available on request. Chassis: * Welded steel construction with welded longitudinal beams and perforated Z-cross members, closely spaced cross members for high floor load capacity * Ramp compartment: between the longitudinal beams, behind the axle assembly underneath the loading floor, two insertion pockets for one each loading ramp, with locking plate in the rear headframe Underrun Protection: * According to EU regulations Landing Gear: * Front: landing legs with one-sided operation * Rear: two adjustable drop supports Axles: * 2 x 10 t air suspension axle assembly, manufacturer SAF, drum brakes approx. 300 x 200 mm, center-aligned for twin tires, ABS, total air suspension stroke approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), operated via hand lever with detent function Tires: * 8-fold, 235/75 R17.5 – our choice of brand. Mounted on 6.75x17.5 wheels with offset Spray Protection: * PVC, in front of and behind the axles, according to EU regulations Load Securing: * On outer frame, approx. every 150 mm, a hole for lashing straps, tensile strength approx. 2.5 t * 6 pairs of foldable lashing rings evenly distributed, tensile strength approx. 8 t * Stake pockets for slip-in stakes 80/50: 3 pairs of stake pockets in the outer frame, evenly distributed Dkedpfx Asy Auf Tol Hjl Brake System: * Compressed air brake system as per EU standards with EBS * Two spirals as connection to the towing vehicle with red/yellow coupling heads * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm Z-hardwood floor sunk into the outer frame Lighting System: * Lighting system as per EU standards, 24 volts, multi-chamber tail lights, license plate lights, side marker and track marker lights at the rear, connection plate on the left drawbar, incl. interconnection cable with 15-pin and 2 x 7-pin connectors Accessories: * 2 wheel chocks with holder * Removable flashing beacon at the rear * 40 mm towing device supplied (max. gross weight 13,500 kg) * Rear extension approx. 800 mm including underrun protection, extendable loading platform with load capacity approx. 2 t, locking positions every 200 mm * Mechanically length-adjustable rigid drawbar, 6 x approx. 100 mm, with bolted towing eye approx. 50 mm as per DIN 74053 * 4 rows of crosswise stake pockets across the load floor, evenly distributed * 12 galvanized steel stakes, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1 x 20’ container * Container locks for 1 x 20’ container, extendable to approx. 2,820 mm, according to ISO 1496, EN 284, or EN 452 * 1 pair of aluminum loading ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles Paintwork: * Chassis shot-blasted, cleaned, and high-quality hot-dip galvanized to the latest technical standards * Superstructure parts cleaned, primed, and hot-dip galvanized * Chassis: hot-dip galvanized + RAL 9011 graphite black * Outer frame: hot-dip galvanized + RAL 9010 pure white * Hubs: KTL black * Underrun protection: RAL 9010 pure white * Rims: RAL 9006 silver * Add-on parts: galvanized / KTL black

Stanje: rabljeno, skupna masa: 2.100 kg, konfiguracija osi: 2 osi, prva registracija: 10/2021, skupna širina: 2.150 mm, skupna višina: 2.330 mm, Oprema: žerjav, Very well-maintained trailer-mounted work platform with a working height of 16 m, basket load capacity of 200 kg, lateral outreach of 9.45 m, power supply to the basket, and including generator. UVV inspection was carried out by Paus in March 2026. GT 16 AG Work Platform - Working height: 16 m - Telescopic design - Lateral outreach: 9.45 m - Basket load capacity: 200 kg - 220 V power feed to basket - Including generator Dsdpfxoyw Ergs Al Hjkl - Fully hydraulic outriggers - Support width: 4.08 m - Support length: 4.29 m - Continuous 360° rotation - Total length: 6.31 m - Transport width: 2.15 m - Transport height: 2.33 m - Weight: 2,100 kg Financing available through our partner banks; we are happy to assist you. We expressly reserve the right to prior sale, as we also list this item on other platforms. Details of included accessories are provided without guarantee. Subject to changes, interim sale, or errors. We strongly offer and recommend viewing and inspection to ensure there are no misconceptions regarding condition or suitability on the buyer's part. Viewing and inspections are possible at any time by appointment and are expressly encouraged.

Stanje: novo, največja dovoljena obremenitev: 16.500 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low Loader | Drive-over Platform Trailer Ref. for enquiries: 11630 Vehicle available immediately from stock in Alsdorf New vehicle inc. COC * Gross weight: 21 t, Payload: 16.5 t, hot-dip galvanized chassis * Platform version with 400 mm high front wall, ramp securing via ramp holding rods and diagonal bracing * Version with gross weight 21 t, reinforced frame and axles, axle spacing 1,810 mm * Floor height approx. 910 mm loaded / approx. 940 mm unloaded * 7 m loading area with 400 mm high front wall * Extended ramps: 3 m one-piece hot-dip galvanized ramps with galvanized grating * Ramp lift with vertically standing, adjustable springs for easy single-person operation * Load securing package: * 4 UVV folding lashing brackets (LC 8,000 daN) mounted in the existing hole pattern in the 45° outer frame, positioned approx. 1 m from front/rear crossmember * 10 UVV retractable lashing brackets (LC 3,000 daN) recessed in the existing hole pattern in the outer frame * 2 UVV lashing rings each at front and rear, recessed in crossmember, LC 10,000 daN * Additional lashing options via holes (Ø 50 mm, LC 1,200 daN) in the front and end crossmember * Preparation for retrofitting container locks (container locks available at extra cost) * Softwood floor, 50 mm thick * Air suspension, Gigant axles incl. EBS 2S/2M, raising and lowering * 235/75R 17.5 (twin tyres, 8x) with tyre pressure monitoring sensor * Plastic toolbox in front of the front wall, right-hand side in direction of travel * LED lighting system * 7-pin socket at rear, prepared for overlength lighting with tail light (58 R) and ground * 2 LED reversing lights at rear * Flashing side marker lights * Oversize warning panel Dkodpfeyvxg Uox Al Hel * 1 removable all-round LED beacon incl. bracket and installation * Folding supports at rear, front support leg with geared winding mechanism ---- Lease purchase example from our partner MMV Leasing: €665/month net for 60 months term with no down payment and €0 final instalment Other terms with/without down payment/final value possible! We are Müller-Mitteltal authorised dealer ----* Our business hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside business hours available by appointment * We speak German, English, Russian, Polish, French * WhatsApp

Stanje: novo, največja dovoljena obremenitev: 12.451 kg, skupna masa: 16.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, Oprema: ABS, * auziehbare Ladefläche * Knorr Druckluftbremsanlage * 3 Achsen mit Trommelbremsen * Front- und Heckgitter ----* Reifendimension: * techn. Gesamtgewicht: 16000 kg * Eigengewicht: 3540 Kg * Gesamtlänge: Dkedpfsyvnwiox Al Hsl ----Fahrzeugnummer/Vehicle: 11937----Irrtümer und Zwischenverkauf vorbehalten----Werbung und diverse Schriftzüge wurden digital entfernt. -----Gerne stehen wir Ihnen für alle Formalitäten, welche beim Kauf eines Fahrzeugs anfallen, mit Rat und Tat zur Verfügung. Teilen Sie uns einfach Ihre Wünsche und Anregungen mit und wir kümmern uns darum. Unter anderem können wir Ihnen gegen Aufpreis die folgenden Dienstleistungen anbieten:----Inzahlungnahme Ihres alten Fahrzeugs TÜV/SP Abnahme Komplette Exportabwicklung Vermittlung von Finanzierungen Beantragung von Exportkennzeichen Überführung von Fahrzeugen Zulassung von Fahrzeugen Bergungen und Fahrzeugtransporte----Ihr VTS Team

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: W09K35135G1KB6013, Leto izdelave: 2016, obratovalne ure: 1.823 h, TÜV veljaven do 08/2026, po želji tudi nov. Vključena ustrezna oprema: klešče, posoda za ruševine, kletka za obešanje. Dodpfxeyt Hhms Al Hekl

Stanje: kot nova (razstavni stroj), številka stroja/vozila: AHW MT3080, skupna masa: 3.000 kg, dolžina tovornega prostora: 3.080 mm, širina tovornega prostora: 1.520 mm, TRAILERWIRTZ, the online pick-up market for your new trailer, offers strong brand-name models ready to take away! - Over 850 new trailers in stock - Over 100 used trailers always available - Over 150 vehicle transporters – popular models with extensive accessories in stock Non-binding example: exhibition trailer ready for collection Brenderup machine transporter MT 3080 GD 308x152cm 3000kg, low loader with tandem axle, V-drawbar, loading ramp as rear gate with supporting leg 13-pin plastic connector, tires: 14 inches Jockey wheel, 6 internal lashing rings (400 daN) Excavator bucket rest Non-slip mudguard coating and step board Hot-dip galvanized, high-quality durable screen-printed floor Sturdy metal chocks, position lighting Recessed lights Spare wheel incl. holder under bucket rest Dkedjyrbnfspfx Al Hel The largest selection of transporters available immediately Sales by telephone order during business hours or 24/7 through our trailer shop Images and description in this advertisement are protected by copyright – logos are trademark protected 03/26 39033

Stanje: rabljeno, največja dovoljena obremenitev: 1.007 kg, skupna masa: 1.500 kg, konfiguracija osi: 1 os, prva registracija: 03/2026, dolžina tovornega prostora: 3.070 mm, širina tovornega prostora: 1.870 mm, višina nakladalnega prostora: 100 mm, skupna širina: 1.960 mm, skupna višina: 925 mm, A66 GW26NG000373 Homologacija za 100 km/h Platformni priklopnik Oporno kolo Dsdeyq U Enepfx Al Hekl Nakladalne rampe Pridržujemo si pravico do napak in predhodne prodaje

Stanje: rabljeno, največja dovoljena obremenitev: 2.186 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, prva registracija: 02/2026, dolžina tovornega prostora: 3.005 mm, širina tovornega prostora: 1.400 mm, višina nakladalnega prostora: 200 mm, skupna širina: 2.035 mm, skupna višina: 2.130 mm, A45 GW26G000189, Transporter gradbenih strojev, proizvajalec STEMA, tip BMAT .2, Dodjyqdqmopfx Al Hokl Skupna masa: 2.700 kg, z jeklenimi nakladalnimi rampami, inercialna zavora, 100 km/h, 3,01 m x 1,40 m Vgrajeni blažilci za 100 km/h * Tandem nizek priklopnik, po izbiri z STEMA V-ojem ali centralno cevjo * Zvarjeno in v potopni kopeli vroče pocinkano podvozje iz masivne jeklene pločevine * Sprednja in stranske stene iz 3 mm debele varjene črne pločevine * 20 cm visoke zvarjene stranske stene * Celotno pohodno dno iz vezane plošče s protizdrsnim premazom (debeline 18 mm), po izbiri tudi dodatno aluminijasto rebrasto dno (debelina 3 mm) * Pohodna jeklena blatnika za enostavno vstopanje in izstopanje * 2 vzdolžna nosilca za optimalno porazdelitev tovora ... in še veliko več. Napake in vmesna prodaja pridržane.

Stanje: rabljeno, skupna masa: 2.000 kg, prva registracija: 08/1995, Prikolica z ogrodjem za reklamne ponjave ali za prevoz stvari Dkodeynvdmspfx Al Hjl Lokacija: Im Erlenkamp 15

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Platform | Trailer Available immediately | Reference number for inquiries: 11611 | Delivery to your address possible * We are happy to provide you with an individual offer Djdjyndh Hspfx Al Hjkl * ---- * Gross weight: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27 m x 2.47 m platform with galvanized 400 mm front wall * Excavator bucket rest made of hardwood, bolted to the front wall * Floor height unladen 930 mm / laden 870 mm * One-piece ramps with hot-dip galvanized grid surface, slip-resistant design, retractable down to approx. 20 mm. Secured by retaining bar and diagonal brace * Ramp lifter with upright, adjustable springs for easy one-man operation * 4 UVV drop lashings (LC 6300 daN) * Perforated outer frame (45°-bent with hole pattern for lashing equipment, lashing force per lashing point LC 2000 daN at a minimum spacing of 480 mm. Installation of drop lashings LC 3000 daN at approx. 600 mm spacing possible), closely spaced cross-stiffeners, high-ribbed front and rear closure with rear loading ramp, hot-dip galvanized * 10 UVV lashing rings LC 3000 daN retractable in the existing hole grid in the outer frame, additional * Additional lashing options via bore holes (Ø 50 mm, LC 1200 daN) in the front and rear crossmembers * Toolbox in front of the front wall * Side marker lights with indicator function * 50 mm thick softwood floor. Chassis hot-dip galvanized * Height-adjustable landing gear at the front, folding supports at the rear * Retrofitting of 2 container locks possible * Drawbar with 40 mm towing eye (hot-dip galvanized), height adjustable, 50 mm eye possible on request * 1 removable LED warning light at the rear * ---- * Leasing, hire purchase, financing, trade-in possible * Example: 510 euros for 60 months’ term, no down payment, no final installment * ---- * Our opening hours: * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 Outside of business hours, viewings possible by appointment. We speak German, English, Polish, and French Leasing, financing, trade-in possible

Stanje: rabljeno, največja dovoljena obremenitev: 2.775 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prva registracija: 02/2026, dolžina tovornega prostora: 3.530 mm, širina tovornega prostora: 1.650 mm, skupna širina: 2.435 mm, skupna višina: 2.130 mm, A15 GW26MG00273 Djdpfxeym Ihze Al Hskl Prevoznik gradbenih strojev, proizvajalec A, tip BMAT, skupna teža: 3.500 kg, nizkopodni priklopnik, s inercijsko zavoro, 100 km/h, z aluminijastimi rampami, 3,53 m x 1,65 m ...in še veliko več. Pridržujemo si pravico do napak in predhodne prodaje.

Stanje: rabljeno, največja dovoljena obremenitev: 949 kg, skupna masa: 1.300 kg, konfiguracija osi: 1 os, prva registracija: 02/2026, dolžina tovornega prostora: 4.010 mm, širina tovornega prostora: 188 mm, višina nakladalnega prostora: 110 mm, skupna širina: 2.450 mm, skupna višina: 860 mm, A13 GW2616429 Multitransporter 4018, Proizv. TEMARED, Tip DMC, . , Skupna teža: 1300 kg, 400x184cm, z inercijsko zavoro, 100 km/h (dodatna oprema), s zložljivo nakladalno rampo (dodatna oprema), nizkopodni, z možnostjo spuščanja Nakladalna višina 400mm Pridržujemo si pravico do napak in vmesne prodaje. Dedsym Igdepfx Al Hekl

Stanje: rabljeno, največja dovoljena obremenitev: 2.775 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prva registracija: 02/2026, dolžina tovornega prostora: 3.530 mm, širina tovornega prostora: 1.650 mm, skupna širina: 2.435 mm, skupna višina: 2.130 mm, A15 GW26NG00315 Dedpfeym Iftjx Al Hekl Prevoznik gradbenih strojev proizvajalca STEMA, tip BMAT, skupna masa: 3.500 kg, nizkopodnožni priklopnik, vztrajnostna zavora, 100 km/h, z aluminijastimi rampami, 3,53 m x 1,65 m ...in še veliko več. Pridržujemo si pravico do napak in vmesne prodaje. Višina nakladanja 500 mm

Stanje: rabljeno, največja dovoljena obremenitev: 2.649 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prva registracija: 02/2026, dolžina tovornega prostora: 4.005 mm, širina tovornega prostora: 1.800 mm, skupna širina: 2.435 mm, skupna višina: 2.130 mm, A14 GW26GA00002 Prevoznik gradbenih strojev, proizvajalec STEMA, tip BMAT .2, skupna masa: 3.500 kg, nizkopodni priklopnik, z vztrajnostno zavoro, 100 km/h, s kovinskimi rampami, nagibni, 4 m x 1,80 m ...in še veliko več. Pridržujemo si pravico do napak in vmesne prodaje. Dedpfx Ajym Ifaol Hokl

Stanje: novo, največja dovoljena obremenitev: 31.900 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release for spring-actuated cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lowering function and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and continuously adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck dashboard via EBS signal – no installation required on truck * SmartBoard as infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED taillights * Removable LED beacon at rear ----General attachments: * Warning plates front & rear * 2 x toolboxes made of galvanized, powder-coated sheet steel approx. 650 x 300 x 600 mm, right side * Closed single plastic mudguards at front * Straight steel spray suppression panels at rear, each with spray suppression * Side underrun protection ----Low-bed platform: * Turntable/platform extension by 520 mm with 45° corners and 3 recessed storage compartments incl. lids and lockable * Flooring on turntable platform made of 50 mm softwood; on low-bed platform made of 60 mm softwood * 20 mm rubber covering instead of timber in drive lane area with a well length of 6,780 mm including sloped ramp * Rubber coating on the ramp left and right, approx. 860 mm length * 4 stake pockets per side (stakes not included) with simultaneous 2 t lashing point capability ----Chassis: * Chassis made of high-strength fine-grain steel ----Load securing (Lasi package): Turntable/platform: * 2 pairs of 13.4 t lashing eyes in outer frame of turntable/platform Low-bed: * 4 pairs of 10 t lashing rings per side on the outer frame, foldable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings at rear on each side ----Ramps: * Rubber covering on foldable access ramps * Hydraulic folding ramps with hydraulic tip extension approx. 4,650 x 720 mm * Hydraulically lateral ramp shift & load-holding valves ----Rear support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outriggers for 3 m overall width (not on rear bevel) * Widening boards stowed on left side compartment ----Excavator boom trough: * Excavator boom trough above rear axle to end of slope approx. L=2,100 mm x W=740 x D=190 mm * 2 pairs of 6.4 t lashing rings at sides in excavator trough ----Hydraulics: Dedpfxeylfvme Al Hokl * Hydraulic flow divider in trailer (for truck hydraulic pump outlet above 40 up to max. 120 ltr./min.) ----Loading dimensions: * Rear loading platform: approx. 6,780 x 2,520 mm (incl. 860 mm ramp) * Platform above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape at sides and rear * Chassis, turntable, access ramps and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer warranty * Errors and prior sale reserved * Sample images may show special equipment ----Lead time: * Vehicle available from approx. week 23/2026

Stanje: novo, številka stroja/vozila: AHW BJT DP2700, lastna masa: 505 kg, največja dovoljena obremenitev: 2.195 kg, skupna masa: 2.700 kg, dolžina tovornega prostora: 2.800 mm, širina tovornega prostora: 1.300 mm, Takoj na voljo za prevoz dvižnih ploščadi ali mini bagrov \ Transportni priklopnik za stroje Cargo Digger Plant 2 280x130x15cm 2.700kg, model z LED osvetlitvijo \ Tandemski nizkopodni priklopnik z V-podvozjem - vzmetena zavora - pnevmatike 14" - višina nakladalne površine 38 cm - pocinkovana jeklena korita z perforiranim jeklenim dnom, zanke za pritrjevanje po DIN - nameščen nosilec za žlico - nagibne in premične jeklene rampe, podporno kolo..... Dogovorite se za termin prevzema po telefonu 02182 699 0 690 od ponedeljka do petka 02.26 \ 543-0110 VERSION29002 Dkjdpfxsyhl Sgo Al Hol